Скачать или смотреть Jeep Fender Decal Wet Application Instructions

Shop at https://www.adventurelifedecals.com

Minimum application temperature +40° F
Applied decal temperature range -40°F to +180°F

Steps:

1. Clean the surface with soap and water and wipe dry with a lint free cloth.
Follow up with rubbing alcohol to remove waxes.

2. Spray the surface with a mixture of water and a few drops of soap.

3. Peel the decal from the paper backing and place it on the fender.
Slide it into place, following the curve of the fender around the vent area.

4. Use a squeegee with a felt edge or a plastic card with a towel or other soft cloth covering the edge to push the soapy water out from under the decal.
Tip: be thorough to remove all of the soapy water from under the decal.

5. Allow it to dry 10-15 minutes. Then press the edges down around the curves.

6. Repeat Steps 1-5 for the other side of the vehicle.

7. Wait 1-3 hours before driving with the decal on.
Tip: wait longer in colder temperatures.