Secret Compartment Frame

▼▼ MORE INFO HERE ▼▼

- Instagram -   / dpmakestuff  
- Patreon -   / dpmakestuff  
- Website - http://www.dpmakestuff.com

The frame is made from Sapele wood and the pins are brass. The corner joints of the frame are called half lap joints and were cut on the table saw with a flat top bit. The pocket for the icepick was cut on an X-Carve CNC router (link below) and the brass pins were not cut with a knife; that was just some fancy editing. Damn near everything I used is linked below. The front face was slightly lower than the rest of the frame after cutting the front off; but since the kerf on the bandsaw blade is so thin, I was able to sand down the difference on the rest of the frame.

This icepick is made by the one and only Jimmy DiResta!
http://shop.jimmydiresta.com/

Links
—Titebond Glue - http://amzn.to/1TmiBAs
—Glue Bottle - http://amzn.to/1SirgW7
—Ruler - http://amzn.to/2bOARY4
—Sharpies - http://amzn.to/2aekAWZ
—Masking Tape - http://amzn.to/2anrVD7
—Marking Gauge - http://amzn.to/1Sir894
—CA Glue - http://amzn.to/1JKAI2L
—Briwax - http://amzn.to/1JKB1dU
—Chisels - http://amzn.to/2ci2RRz
—Forstner Drill Bits - http://amzn.to/2bRDTMk


Shop Equipment
—Saw Stop - http://amzn.to/2ctLWdP
—Band Saw - http://amzn.to/2c72OZN
—Rockler Stuff - http://amzn.to/2bYUGJf
—Lathe - http://www.rockler.com/excelsior-mini...
—X Carve CNC - https://www.inventables.com/technolog...

===========================================
Feeling like sending me a letter, stickers or crisp 100 dollar bill? Do it!
I try to respond to everyone.

PO BOX 3112
Beaumont, Alberta
T4X 1K9
CANADA

#imustcreate #imake #dpmakestuff