Hyway Cylinder Problems For Husqvarna 372 And How To Raise Transfers Without A Right Angle Tool!

Описание к видео Hyway Cylinder Problems For Husqvarna 372 And How To Raise Transfers Without A Right Angle Tool!

Showing some major problems I had with the Hyway cylinder. The plating chipped very easy around the ports just touched with finger nail it would chip. The blow down was very bad 35 degrees. So I used warrior diamond tools with the dremel flex shaft to raise the transfers. The squish band was .070 plus so I had to use a 268 piston to fix it. I have to epoxy the intake to get my intake numbers around 158 degrees. I raised the exhaust port to 98 to fi the bad plating. Cylinder is roughed in for now.

Комментарии

Информация по комментариям в разработке

Похожие видео