Radiomaster Nexus Part 3 • PRO PILOT Shows How-To Setup Helicopter Geometry on Rotorflight

This video is part three of a five part series on setting up the brand new Radiomaster Nexus FBL. I'll be joined by OMP Team Pilot Rob Burrow to walk you through how to setup geometry on your Rotorflight equipped helicopter.

Part 1: RotorFlight
Part 2: EdgeTX
Part 3: Geometry
Part 4: Motor Setup
Part 5: Advanced Setup

PRODUCT [AFFILIATE] LINKS
► Radiomaster Nexus FBL: https://www.radiomasterrc.com/product...
► Radiomaster RP3-H Rx: https://www.radiomasterrc.com/product...

REFERENCE LINKS
► RotorFlight Configurator: https://github.com/rotorflight/rotorf...
► ELRS Telemetry Reuse Guide: https://www.rotorflight.org/docs/Tuto...
► RotorFlight Discord:   / discord  
► RotorFlight Setup Guide: https://www.rotorflight.org/docs/Tuto...
► Telemetry Re-use Commands: https://www.rotorflight.org/docs/Tuto...

00:00 Intro
03:22 Wiring
04:22 Disconnect Servos
05:38 Lower Calibrations
06:25 Configure Servos
07:32 Set Arms to 90°
12:06 Set Servo Direction
13:37 Set Servo Endpoints
15:29 Level Swashplate
17:54 Center Tail
19:16 Geometry Correction
20:52 Main Rotor Settings
21:09 Verify Control Movement
23:10 Verify Tail Movement
24:56 Cyclic Calibration
28:33 Collective Calibration
29:07 Collective Geometry Correction
30:44 Cyclic and Collective Limits
35:37 Swash Plate Trims
36:10 Tail Geometry
42:17 Tail Limits

RCVR MERCH and PRODUCT LINKS - If you use my affiliate links, the channel will receive a small commission. These links cost you nothing extra to use.
► RCVR-1 Orange https://www.etsy.com/listing/16830707...
► RCVR-1 Black https://www.etsy.com/listing/16808499...
► RCVR-2 https://www.etsy.com/listing/14977817...
► NEW Merch Store: https://rcvr.myspreadshop.com/

RCVR CHANNEL LINKS
► Support the work I do here on Patreon:   / rcvideoreviews  
► Discord - Hang out with the RCVR Crew:   / discord  
► EdgeTX Fest 2024: https://edgetx.org/fest2024/


#rcvideoreviews #nexus #rotorflight #radiomaster