Скачать или смотреть How to add GPS to Your Raspberry Pi Pico | A Simple GPS Project

🔗 The full guide : https://core-electronics.com.au/guide...

In this video, we will be learning how to add a GPS receiver module to a Raspberry Pi Pico. We will be taking a look at how GPS works, and how to wire up and code your project to get coordinates, as a final step, we will be making a short and sweet GPS project - a small device that tracks a target location and uses our current location to display the distance and direction to that target, allowing you to navigate there from anywhere on the surface of the earth.

🔧🔨🧰 Hardware featured in this guide:

NEO-6M GPS Module:
https://core-electronics.com.au/catal...
Picos:
https://core-electronics.com.au/raspb...

💡❓ If you have any questions about this content or want to share a project you're working on head over to our maker forum: http://coreelec.io/forum

0:00 What we are doing
0:20 How GPS works
1:57 What you will need
2:15 Wiring up the GPS module
3:00 Reading the raw UART output
6:55 Using a GPS library
9:25 Project: DIY navigation device

🌏🦘 Core Electronics is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:

• Raspberry Pi https://core-electronics.com.au/raspb...
• Arduino https://core-electronics.com.au/ardui...
• Sparkfun https://core-electronics.com.au/brand...
• Adafruit https://core-electronics.com.au/brand...
• Pololu https://core-electronics.com.au/brand...
• DFRobot https://core-electronics.com.au/brand...

The following trademarks are owned by Core Electronics Pty Ltd:

"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo