How to Replace Rear Strut Assembly 2007-2010 Chrysler Sebring

Buy Now!
New Strut & Spring Assembly Set from 1AAuto.com http://1aau.to/ib/1ASSP01163
New Strut & Spring Assembly from 1AAuto.com http://1aau.to/ia/1ASTS01137

This video shows you how to install new reliable TRQ struts in your 2007-2010 Chrysler Sebring. TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly.

This repair was done on a 2010 Chrysler Sebring Touring 2.4L Sedan 4-Door FWD and the process should be similar on the following vehicles:
2007 Chrysler Sebring
2008 Chrysler Sebring
2009 Chrysler Sebring
2010 Chrysler Sebring

Tools you will need:
• Pry Bar http://1aau.to/ohS/1AXAA00020
• 18mm Wrench
• 15mm Socket http://1aau.to/oCn/1AXAA00015
• 18mm Socket
• 19mm Socket
• Torque Wrench http://1aau.to/osj/1AXAA00044
• Rust Penetrant
• Center Punch http://1aau.to/obK/1AXAA00055
• Floor Jack http://1aau.to/ojv/1AXAA00068
• Hammer

Subscribe:    / @trq  

Check out our playlist:
Chrysler Sebring 2007-2010 3rd Generation:    • Chrysler Sebring 2007-2010 3rd Genera...  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.