Seeed Studio XIAO nRF52840 1: Programming with Arduino IDE and nRF Connect SDK

This very small and inexpensive developer board from Seeed is equipped with the Nordic Semiconductor SoC nRF52840 and can be programmed with both the Arduino IDE and the nRF Connect SDK. It supports BLE and also OpenThread via Zephyr. The Xiao has an Arduino bootloader and the firmware in uf2 format can be easily transferred to the chip using drag and drop. In this video, we first explore the board's features, program a Blink example first with the Arduino IDE and then with Zephyr via the nRF Connect SDK.


You can support me at Patreon:
  / wsnandiot  


--Hardware-----
Seeed Studio XIAO nRF52840:
https://www.seeedstudio.com/Seeed-XIA...


--Software--------
Arduino IDE:
https://www.arduino.cc/en/software

nRF Connect SDK:
https://www.nordicsemi.com/Products/D...

Visual Studio Code:
https://code.visualstudio.com/




00:00 Indroduction
00:23 Unboxing
02:00 Properties
02:58 Pinout
04:14 Battery charger
05:15 Bootloader mode
06:06 Install Arduino IDE board library
07:11 Blink example with Arduino IDE
10:21 Blink example with Zephyr
13:56 Outro