Скачать или смотреть ★Torque calibration from third-party certified wrench-- Actual Correction

【海力牌--高精度 機械脈衝扭控工具-第三方認證-現場校正】★High-precision Mechanical pulse torque control tool★Torque calibration from third-party certified wrench-- Actual Correction★H系列★H series★Hitorq★

★H系列-第三方認證-現場校正
●這次設定認證扭力為拆螺絲13NM牛頓米
●扭力認證步驟如下:
1.先在螺絲及其上方用筆畫出相交線
2.使用第三方認證過之扭力板手進行校正
3.工具達到13NM時,校正螺絲及其上方相交線
4.扭力13NM牛頓米時,二相交線對齊,扭力校正完成!
即完成第三方扭力認證

●Set the torque of loosening the screw we want to verify is 13NM.
●The steps for torque certification are as follows:
1. First use a pen to draw intersecting lines on the screw and above it.
2. Use a third-party certified torque wrench for calibration.
3. When the tool reaches 13NM, are the correction screw and the intersection lines above it aligned?
4. When the torque is 13NM, the two lines are aligned and the torque correction is completed!
This completes the third-party torque certification.

Best Power Tools Co., Ltd.
穩力精密氣動工具股份有限公司
Address：台南市安南區工明南一路88號
No.88 GongMing S 1st Rd., Annan Dist, Tainan City 70968, Taiwan
TEL.：(06) 2566345
FAX.：(06) 2559263
E-mail：[email protected]
Skype：bestpower-sale1
LINE： bestpower-wenly (0905111974)
QQ： 2335979023
官網 Website： www.best-power.com.tw
微信 Wechat： haili-tools