Скачать или смотреть etrailer | Detailed Breakdown of the Hopkins Endurance 4-Way Flat Trailer Wiring Harness

Click for more info and reviews of this Hopkins Custom Fit Vehicle Wiring:
https://www.etrailer.com/Custom-Fit-V...
Check out some similar Custom Fit Vehicle Wiring options:
https://www.etrailer.com/dept-pg-Cust...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-Hopk...
Today we're going to be taking a look at the Hopkins endurance four-way flat trailer end wiring harness. This is a simple, efficient method for rewiring your trailer with a four-way flat trailer end connector. Now, this is a wishbone design. You can see right out of the housing of the plug we have a green and brown wire. That's together. We have a yellow and brown wire that runs together.

It creates that Y. The left side tail light wire is actually bundled with the yellow left turn and brake wire. Then, the right side tail light wire is bundled with the green right turn and brake wire. We actually have two separate brown tail light wires, which is the most effective way to re-wire your trailer with the four-way flat connector. It's going to feature an easy pull, ergonomic grip on the connector that makes disconnecting and plugging in the connector very quick and easy. It's going to feature the tin plated terminals to last a long time and do a great job at resisting rust and corrosion.

The unit's also going to feature a white ground wire. That's included to get grounded to a nice clean metal surface on the trailer frame. The entire length of the harness is going to measure thirty feet long. Then, the length of the ground wire right here is going to measure thirty-six inches long. That's going to do it for today's look at the Hopkins endurance four-way flat trailer end wiring harness..