NABEL AQUA bathroom water softener regeneration process video

NABEL AQUA BATHROOM WATER SOFTENER
The regeneration process of a water softener typically involves several key stages to remove accumulated hardness minerals and restore the softener's effectiveness. Here's a general overview:

1. *Backwash:* The softener unit is first flushed with water to remove loose debris and sediment from the resin bed. This stage helps to clean the resin beads and prepare them for the regeneration cycle.

2. *Brine Draw:* A brine solution, usually made from salt dissolved in water, is drawn into the resin tank. This solution saturates the resin beads, allowing them to exchange the accumulated calcium and magnesium ions (which cause hardness) for sodium ions from the brine.

3. *Rinse:* After the brine solution has been drawn through the resin, the softener is rinsed with fresh water to remove excess brine and any remaining hardness minerals. This helps to ensure that only the sodium ions remain on the resin beads.

4. *Recharging:* The softener is refilled with fresh brine solution, readying it for the next cycle. This step prepares the unit for the next period of water softening.

5. *Return to Service:* The unit resumes its normal operation of softening water.

The exact process may vary depending on the model and type of water softener.

#watertreatment #bangalore #cleanwater #hardwatertreatment

further details please contact us
9789887519/8300179392