How to Replace Rear Brake Pads and Rotors 2008-2012 Honda Accord

BECOME A PATRON! LEAVE A DONATION :)
  / leekautorepair  

2010 Honda Accord 2.4
Rear brakes may be a pain to do because of the rotating caliper piston but with the right tools and directions you should not have a problem doing this all by yourself. No help!

Make sure you get the correct pads with the hardware. Replace hardware with new and don't forget the spring for the pads itself. Compare new rotorS with old before installing.

Tools used:
17mm wrench
17mm ratchet wrench
12mm ratchet wrench
3/8 ratchet
7/8 wrench
12mm socket 3/8
17mm socket 3/8
Impact Gun
19mm socket 1/2
Pry bar
Hammer
Impact screwdriver set
Caliper service kit
Wire brush
Flashlight

BRAKE CALIPER SERVICE KIT http://www.harborfreight.com/disc-bra...

IMPACT SCREWDRIVER KIT https://www.amazon.com/Lisle-29200-Ha...

Check out my other vids
   • How to Replace Front Brakes, Pads and...  
   • How to Recharge a Car AC System  

*Please be aware that I am not responsible for you actions in any type of way. If you get injured during the job or damage other parts including the engine, trans, and other electronics I'M NOT RESPONSIBLE! Always work with safety and please do your research