How to clean a performance air filter with the BMC washing kit | Car Motorbike high flow filter K&N

Описание к видео How to clean a performance air filter with the BMC washing kit | Car Motorbike high flow filter K&N

BMC performance high flow air filter washing kit. In this video I wash and oil this BMC air filter with the BMC washing kit. There are Six steps to this process and it takes a good 24-36hr to complete. After washing, you will need to let it dry out. This does take some time.

Six steps to follow;

1) Once the filter is removed, gently beat the polyurethane structure against a stiff surface to eliminate the largest impurities (grass, gravel, bugs, etc.), being careful not to damage the filtering element. Do not use compressed air as this can damage the cotton filter.

2) Position the filter on a container and pour the detergent (WADET500) on the filtering element, using about half the bottle and leave the detergent on for 20/30 minutes.

3) Rinse the filter thoroughly and very gently on both sides using water until the filtering element looks clean. The cotton that makes up the filtering element will not go back to being perfectly white, but it is enough to check against the light for the absence of any impurities or dirty oil residue.

4) Let the filter air dry without exposing it to direct sunlight: the filter is dry when it no longer releases any traces of water or dampness.

RE-APPLYING OIL TO THE BMC AIR FILTER USING THE BOTTLE (WAFLU250)

5) Using the oil, place the tip on the first pleat of the filtering element: proceed to re-apply oil only on one side of the filter, applying slight pressure to the bottle so as to make it easier for the oil to flow out (a continuous action is recommended in order to avoid any oil deposits).

6) Once the operation is finished, wait until the oil is completely absorbed, 30 mins - 1 hour; you can check this by verifying the evenness of the red colour from on one side and on the other of the filtering element. Dab the area with clean cotton cloth to eliminate any excess oil that may be left over on the polyurethane and on the support mesh.

#Airfilter
#Performance
#BMC
#K&N
#Porsche
#Car
#motorbike
#engine
#garagetech
#clean
#wash

Комментарии

Информация по комментариям в разработке