About
The Dblocks Big Ripper has never looked so good! This bike is the signature ride of the king of the streets, Darnell Meyers, aka Dblocks. It’s spec’d with specific parts that Dblocks has chosen, such as the Famous-inspired snow camo frame & fork, Freedom ThickSlick tires, Power Wing cruiser bars, and New York Flyer seat. If you want to stand out in the crowd, this is the bike to ride.
Key Features
Retro 6061 aluminum Big Ripper frame with Floval tubing, looptail rear end, American bottom bracket, and classic PK Ripper wishbone plate
Full Cr-Landing Gear forks
Cr-Mo Power Wing cruiser bars
Double-wall rims with sealed bearing high-flange hubs
SE 3-piece V-Ridge cranks with alloy SE sprocket
Authentic ODI Mushroom II grips with 45 Years of Radness SE donuts
Freedom ThickSlick Comp 29” x 2.10” tires
SE 45 Year Anniversary padset
New York Flyer Seat with super grippy top cover and bottle opener
SE Wheelie Pegs
Custom Dblocks sticker sheet
30.5pounds
SPECIFICATIONS
COLOR(S) Snow Camo
FRAME Dblocks Wheelie King Model, 6061 Aluminum Floval Tubing, Looptail Rear End, 68mm American Bottom Bracket, Wide Rear Stays, Retro Dropouts
FORK Landing Gear, Full Cr-Mo
CRANKSET SE V-Ridge 3-pc Cr-Mo Cranks, 175mm, Sealed American Bottom Bracket, 160mm Spindle Length, 19mm Spindle Diameter, 36T Alloy SE Racing Sprocket
PEDALS Wellgo Low-profile Platform
CHAIN KMC S1
WHEELSET Sealed Bearing 36H High-Flange Alloy Flip Flop Hubs w/ Double-wall Rims, 16T Freewheel, Stainless Spokes
TIRES Freedom ThickSlick Comp, 29" x 2.10" Front & Rear
BRAKESET Tektro 855AL V-Brake, Linear Cable
BRAKE LEVERS Tektro 316A, 2-Finger Alloy
HEADSET Tange 1-1/8" Threadless
HANDLEBAR Cr-Mo Power Wing Cruiser Bar, 28" x 7", 10° Backsweep, 1° Upsweep
STEM Retro Alloy Top-Load w/ Engraved SE Logo & Lightweight Cutouts, 55mm Reach
GRIPS Special Edition ODI Mushroom II Dual-Ply Grips, Made in USA, w/ 45 Years of Radness SE Donuts
SEAT Raise It Up Flyer Seat w/ Custom SE Bottle Opener Brace
SEATPOST Micro-Adjust Alloy, 27.2mm
SEAT CLAMP SE Racing Champ Clamp, Alloy, 31.8mm Inner Diameter
ACCESSORIES 45 Years of SE Radness Padset, Custom Dblocks Sticker Sheet, Alloy Valve Caps, SE Wheelie Pegs
WEIGHT 30.5 lbs / 13.83 kgs
*Specifications subject to change without notice
GEOMETRY
A TOP TUBE, ACTUAL 23.6"
B SEAT TUBE, CENTER TO TOP 16.9"
C SEAT TUBE ANGLE 71°
D HEAD TUBE ANGLE 71°
E CHAINSTAY LENGTH 18.25"
F WHEELBASE 44"
G BOTTOM BRACKET HEIGHT 12.25"
H STANDOVER 30.75"
SUGGESTED RIDER SIZE 5'5"+ (165cm+)
STEM 55mm
HANDLEBAR WIDTH 29"
CRANK 175mm
WHEEL SIZE 29"
SEAT POST DIAMETER 27.2mm
Информация по комментариям в разработке