Owon P4603 3A 60v PSU, H801 LED Controller and 300 5050 LEDs

Setting up and powering the H801 RGBWW LED Controller using the Owon P4603 3A power supply and using the excellent Tasmota (8.1.0.2) alternative firmware.

I'm new to the H801 controller and when setting it up for the first time, including FLASHING Tasmota and running RGB LEDs to their limits, I figured it best to use a beefy power supply. The Owon P4603 can produce up to 3 amps output at up to 60v and has output monitoring and memory as well as overvoltage and overcurrent limiting. In this instance the LEDs and controller were using somewhat under 2 amps, in an update the supply will be running far nearer its own lmits.

Links are in the video - I also have a link for PC software for the Owon PSU - I'll include here...

https://www.owon.com.hk/supports_pc_s...

Check out my blog at https://tech.scargill.net

If the video anywhere states 6 amps capacity please note the correct capacity for this PSU is 3 AMPS maximum.

At the risk of being boring - if you like this video, please subscribe to my Youtube channel - and share with friends who might also find the content interesting.

If you are not already a SUBSCRIBER to my Youtube video TECH channel - doing so would be very helpful and of course it is free. Also THUMBS UP and SHARE if appropriate - thanks a LOT for your help.

https://bit.ly/scargillyoutube