Guitars in Fusion 360 | Part 1 - Introduction & First Sketches

This is the first in a series of how I model electric guitars in Autodesk Fusion 360. Each episode I will cover the techniques I use to tackle this deceptively simple model!

If you'd like to follow this series, please like or subscribe! Thank you!

FretFind2D:
http://www.ekips.org/tools/guitar/fre...

Part 2 | First Extrusions & Lofting Basics:
   • Guitars in Fusion 360 | Part 2 - Firs...  

Part 3: Shaping the Body & Neck Transition:
   • Guitars in Fusion 360 | Part 3 - Shap...  

Part 4: Headstock Transition
   • Guitars in Fusion 360 | Part 4 - The ...  

Part 5: Fretboard, Nut, and Bridge
   • Guitars in Fusion 360 | Part 5 - Fret...  

Part 6: Pickups, Knobs, and Tuners
   • Guitars in Fusion 360 | Part 6 - Fina...  

#Guitar #Fusion360 #DIY