From Scrap to Stock: Rolling Silver Sheet

In part 1 of this series on recycling metal (   • From Scrap to Stock: Silver Ingot Cas...  ), John Sartin demonstrated how to take silver scrap and turn it into an ingot. In this video, John walks you through the steps to turning that ingot into sheet you can use for your next design. Follow along as he files, polishes, removes casting scale, forges, anneals and more before thinning the sheet on a rolling mill. In part 3 (   • From Scrap to Stock: Pulling Wire  ), John takes an ingot and turns it into usable wire.

Check out the products used in this video:
Hand Files - http://ow.ly/DdWy50E6pLc
Sanding Sticks - http://ow.ly/YhpZ50E6pSD
Anvil - http://ow.ly/lSu350E6pYk
Forging Hammer - http://ow.ly/R4eK50E6q5v
Calipers - http://ow.ly/wWUx50E6qhx
How to Make Barrier Flux -    • Create Barrier Flux With Boric Acid &...  
Boric Acid - http://ow.ly/L7M850E6qnt
Methyl Alcohol - http://ow.ly/JWu650E6qty
Flux Brush - http://ow.ly/AsTN50E6qzE
Torch - http://ow.ly/KTAg50E6qHo
Torch Igniter - http://ow.ly/P9LU50E6qMA
Rolling Mill - http://ow.ly/a9Dn50E6qSl

Rio Grande stands for makers who create with their hands and their hearts and who are courageous enough to make jewelry their livelihood.

Connect with Rio Online:
Visit Rio's Website:
Subscribe to Our Channel: http://ow.ly/dAbu309U7eg
Find Rio on Facebook: http://ow.ly/DpRd309U63Z
Follow Rio on Twitter: http://ow.ly/wdtU309U6oF
Follow Rio on Instagram:  http://ow.ly/eu5A309U6vM