Custom White Knight Batcycle McFarlane

#photography #mcfarlane #actionfigures

Custom White Knight Batcycle from McFarlane Toys.
Much easier to modify than the last cycle, just removing the visible screws and pulling it apart. The rear panel comes off by heating it and pulling till one side gives.

Once pulled you can paint in your desired colores.. Paint before adding any LEDs..

If you are not adding lights , paint and seal your work and reassemble the cycle.

On the rear panels for the rear wheel you can attach an LED on the inside
Glue down with UV resin

Drill a hole for the lead to go thru and plug into the expansion board.

Drill two holes for the nano LED for the taillight.

Create your own taillight lens with UV resin a reuseable mold. Mix dye with the resin and cure till hard. Glue the nano LED to the lens and attach to the tail of the cycle

Turn the instrument panel into a waffle by drilling several tiny holes close together. Pull out the section with pliers. Attach the mini LED to the side next to the peg. Custom make a translucent panel for the screen. Plug the LED into the flicker board.

Drill the instruments half way in, drill thru with a smaller bit to feed the nano wires. Glue the LED inside with UV resin, drill into the wall to feed the wire into the body cavity and attach to the nano board.

Drill the head lamps out and countersink them to be flush, cover with translucent panel to create the lamp.

Drill the gun ports and feed the mini LED in and glue down with UV resin, connect to the board . Repeat for the opposite side.

Drill out the side marker on the gun, fill with resin and glue the mini LED on the inside with UV resin, use a self blinking light.

Paint your panel to your liking, reassemble

Attach your power source either USB or battery box.

seal any painted surface with clear coat of your choice

LEDs
Briksmax / Amazon.co

Lightmybricks.com
For nano brds and Nano LEDs


Reusable Clay Mold Making Only Use Hot Water. Eco package (Clear White, 8pcs) https://www.amazon.com/dp/B07M9XS3FX/...


Sharing techniques to customize current action figures by painting or sculpting what is needed. Producing a figure the is either improved or just creating one from parts of other figures.



INSTAGRAM
photobella_photography

FACEBOOK
  / photobella.visual  



Not sponsord by any company, all items are purchused by me and and items are created by me. Any links shared are only to share information to other creators.