How To Assemble and Disassemble MDMS and SAT of Wincore ATM Dispenser

How To Assemble and Disassemble MDMS and SAT of Wincore ATM Dispenser

Assembling and disassembling the MDMS (Media Dispensing Mechanism System) and SAT (Security Access Terminal) of a Wincore ATM dispenser requires specific procedures tailored to Wincore's design. While I can provide general guidance, it's essential to refer to the official documentation provided by Wincore for precise instructions. Here's a general outline:

Disassembling MDMS and SAT on a Wincore ATM Dispenser:

1. Preparation:
a. Power off the ATM dispenser and disconnect it from the electrical source.
b. Gather the necessary tools for disassembly.

2. MDMS Disassembly:
a. Remove any cash or media from the MDMS unit.
b. Disconnect all cables and connectors from the MDMS unit according to Wincore's instructions.
c. Carefully remove any additional components, such as dispensing mechanisms or sensors.
d. Lift the MDMS unit out of its housing, taking care to avoid damage.

3. SAT Disassembly:
a. Disconnect the SAT unit from the main ATM unit by removing cables or connectors as instructed by Wincore.
b. Unmount the SAT unit from its position on the ATM dispenser.
c. Follow Wincore's guidelines for further disassembly if necessary.

4. Packaging and Storage:
a. Properly package all components for storage or transportation.
b. Label components and cables for easy reassembly.
c. Store components in a clean, dry area per Wincore's recommendations.

Documentation:
a. Document the disassembly process, noting any issues or concerns.
b. Keep all documentation and manuals together with the disassembled components for reference during reassembly.

Assembling MDMS and SAT on a Wincore ATM Dispenser:

1. Preparation:
a. Ensure you have the necessary tools and components for assembly.
b. Read and understand the assembly instructions provided by Wincore.

2. MDMS Assembly:
a. Position the MDMS unit in the designated area of the ATM dispenser.
b. Connect the required cables and connectors according to Wincore's instructions.
c. Install any dispensing mechanisms or sensors as specified by Wincore.

3. SAT Assembly:
a. Place the SAT unit in its designated location on the ATM dispenser.
b. Connect the SAT unit to the main ATM unit using the provided cables.
c. Secure the SAT unit in place according to Wincore's instructions.

4. Testing:
a. Conduct thorough testing of both the MDMS and SAT units to ensure proper functionality.
b. Test each component individually and then together to verify seamless operation.
c. Perform test transactions to ensure cash dispensing and security functions work correctly.

4. Final Checks:
a. Inspect all connections to ensure they are secure.
b. Close any access panels or covers and secure them properly.
c. Ensure that the assembly meets Wincore's specifications and standards.

Remember, these steps are general guidelines. Always refer to the specific instructions provided by Wincore for detailed guidance on assembly and disassembly procedures tailored to their ATM dispensers.