2008 Toyota Tacoma Cruise Contol Not Working - Case study

Описание к видео 2008 Toyota Tacoma Cruise Contol Not Working - Case study

During this video I walk through the tests and checks that I performed while diagnosing this 2008 Toyota Tacoma. I used a Snapon Modis Edge scanner to scan the cruise control module and check the signal from the cruise control switch. This test confirms that the clock spring and circuit is intact and that the problem is in the switch. I installed a new cruise control switch in the steering wheel and then tested it with the scanner. By performing the signal test before unhooking the battery I was able to prevent further testing of the clock spring and the wiring to the ECU. After everything was fully assembled I drove the vehicle and the cruise did work.

Комментарии

Информация по комментариям в разработке

Похожие видео