Building An RGB Pixel Tree

A behind the scenes look at how we assemble an RGB Pixel Tree for our Christmas Light Show

PARTS LIST

The majority of the parts to build a single tree were purchased from HolidayCoro.com. I have had great expereince with this company over the years. Not all parts listed below were shown in the video as some were used for mounting the tree outside. The parts list is specific to my build and doest take into consideration parts and controllers that I already own that may have been used.

16 x 711-WP Smart / Pixel RGB LED Node 8mm/12mm 12v 2811 50 Node String 3” spacing
http://www.holidaycoro.com/12mm-Pixel...

2 x Power Supply - 12v / 29 amps / 350 Watts
http://www.holidaycoro.com/12-Volt-35...

24 x PixNode Classic Strip(tm) - 2” Spacing
http://www.holidaycoro.com/PixNode-Pi...

1 x QuickTree™ Pixel MegaTree Topper Mounting System
http://www.holidaycoro.com/Pixel-Stri...

1 x Center Pole Load Spreader for QuickTree
http://www.holidaycoro.com/product-p/...

3 x Timber Nailes

16 x Strain Relief Tab for PixNode Strips
http://www.holidaycoro.com/PixNode-St...

200 Count Pack of Small Zip Ties

1 x Black Vinyl Fence Posts
https://www.lowes.com/pd/Vinyl-Coated...

1 x Mounting Plate Adapter Kit
http://www.holidaycoro.com/Dual-350w-...

1 x CableGuard CG 1500 Box
http://www.holidaycoro.com/CableGuard...

1 x Falcon F4V2 Differential Receiver Board
https://www.pixelcontroller.com/store...

1 x Falcon F4V2 Differential Expansion Board
https://www.pixelcontroller.com/store...

7 x Power Injection Cabling
http://www.holidaycoro.com/Three-Cond...

8 x Female Pigtail
http://www.holidaycoro.com/product-p/...

Guide Wire Kit for outdoor mounting
https://www.amazon.com/KJXXKJ-Stainle...

Rebar Or Tent Stakes