OpenWRT x86 PC - Install & Setup Ethernet Network Adapter - Intel Quad Port Server Adapter

In this video, we will install a 4 ports network adapter - the Intel Ethernet Server Adapter i340-T4 on x86 OpenWRT PC. The installation process is easy since OpenWRT natively supports Intel GbE driver, hence no addition packages is required. However, if you are using a card from a different manufacture, you may need to install the relevant drivers/packages in order for the NIC to work.

My x86 OpenWRT PC specs:
- CPU: Intel® Xeon® Processor L5630 - 4 cores, 8 threads @ 2.13 GHz
- RAM: 2 x 2 Corsair CMX4GX3 DDR3 1600Mhz
- Motherboard: Intel X58 motherboard from Aliaexpress
- PSU: Acbel unknow model

Video timeframe:

00:00 - Introduction
00:32 - Download OpenWRT firmware for x86 PC
01:00 - Write the OpenWRT firmware to USB with Rufus
01:32 - x86 OpenWRT PC hardware overview
02:36 - Boot up the x86 OpenWRT PC
03:11 - Identify the physical & OpenWRT network interfaces
04:03 - Modify /etc/config/network to setup LAN & WAN interfaces
05:10 - Connection check & troubleshoot
06:50 - How to re-assign the network port on OpenWRT LuCI
07:27 - Moving on - learn more about OpenWRT

OpenWRT x86 Tutorial:    • OpenWRT - x86 PC Installation - Live USB  

As always, if there is any question, please leave it in the comment section.
Thanks for watching!