How to Install Hull Liner with Foam

In this video tutorial we want a section of the hull liner to simulate our upholstered design that we carried throughout the boat’s exterior seating. To accomplish this task we will be using a few different colored vinyl fabric combinations and sewing them together. Then on the backside a thin foam will be glued to the sewn assembly to make a hull liner with foam. After the fabric is prepped we will demonstrate how to install it in an aft cabin of a power boat using a spray glue.

For supplies and tools visit: http://www.sailrite.com

How to Install Hull Liner with Foam Chapters:
Preparation & Patterning - 0:28 min
Gluing Foam to Fabric - 3:52 min
Installing Hull Liner with Foam - 7:49 min
Trimming Excess - 11:12 min
Creating Upholstered Trim - 14:10 min
Materials List - 14:52 min

Materials List:
Dura Skrim Patterning Material - Item # 103134
Marine Vinyl Fabric from Sailrite
(we used Morbern Seabrook - Items # 105978 & #105987 / Channeling Fabric - Item # 105994)
3M Adhesive Cleaner 32oz (Quart) - Item # 108984
Polyurethane Foam 1/4" With Fabric Backing 60" - Item # 105432
3M General Trim Adhesive - Item # 73211
(one can will provide about 30+ square feet coverage, about 3 yards of 54" wide fabric)

Tools List:
Staples for EZE TC-08 Staple Gun 1/2" Crown (Stainless Steel) - Item # 104981
EZE TC-08 Long Nose Staple Gun - Item # 105509
Gingher Scissors Right Handed - Item # 19104
Masking Tape, Marker, Tape Measure, Pencil, Razor blade, Rags, PVC Lumber

For supplies and tools visit: http://www.sailrite.com
Watch the Full Playlist of the 2016 Project Boat Here:    • Sailrite's 2016 Project Boat - 1982 R...