Airzone Lite Thermostat: Basic instructions for use

Airzone presents our new range of wired and wireless Lite thermostats with an elegant, simple design that will enable you to enjoy comfort at the press of a button.

From your Airzone Lite device you can change the temperature or turn your system on or off in the zone in which it is located.

In the case of the wireless Lite thermostat, press once to activate the device and to check the status. The LED on/off button also indicates the status of the zone.

A steady LED indicates that the device is on in the zone in which it is located. A flashing LED indicates it is off.

A range of colors shows the operating mode, so if the LED is:

-Purple: the system is set to Stop.
-Red: there is demand in Heating mode.
-Blue: there is demand in Cooling mode.
-Green: the zone is at comfort point.

Use these bars to change the temperature by up to 3ºC, in increments of 1ºC compared to the base temperature set in your Blueface thermostat or via your Airzone Cloud Webserver.

If the temperature limit is exceeded, the temperature adjustment bars will start flashing.

After a few seconds, the LEDs on your wireless Airzone Lite thermostat will switch off in order to save energy.

When the battery of your wireless device is about to die, you will see a warning on your Blueface thermostat or on your Airzone Cloud Webserver. Replace the battery as shown in this video.