How to Bend & Install Flex-A-Rail Awning Track

In this video tutorial we will be showing how to make a rather sharp radial bend to Flex-a-Rail Awning Track. This awning track will be used to secure an aft curtain enclosure panel in place on a Maxum 2900 powerboat's radar arch.

Order supplies at: http://www.sailrite.com

How to Bend & Install Flex-A-Rail Awning Track Chapters:
• Measuring & Patterning – 33 mins
• Bending Track – 2:55 mins
• Installing Track – 7:28 mins
• Material List – 14:05 mins

Materials:
• Flex-A-Rail White 90" Long - https://www.sailrite.com/Flex-A-Rail-...
• Keder Awning Rope White 5/16" - https://www.sailrite.com/Keder-Awning...
• Trimmable Butyl Tape White 3/4" - https://www.sailrite.com/Trimmable-Bu...
• Screw Flat Head 4 x 6 x 3/4" - https://www.sailrite.com/Screw-Flat-H...

Tools:
• Tape Measure 120 Inch - https://www.sailrite.com/Tape-Measure...
• 3M Filament Strapping Tape 3/4" - https://www.sailrite.com/3M-Filament-...
• Screwdriver Square Head #0 - https://www.sailrite.com/Screwdriver-...
• Pencil, tape measure, scrap cardboard, Heat Gun, Screw Driver, Hack Saw, Marker, Dremel Tool (with drum sander), Drill with 1/8” bit

Order supplies at: http://www.sailrite.com