Скачать или смотреть Race Timer Explainer Video

Learn more about the MVP Race Timer at:

https://goo.gl/3AhdiU

Today we’ll be going through set up and operation in the Multi Racer Mode for Gopher’s MVP Race Timer.

After installing the software and you have the clock properly hooked up to a power source, press the power switch in the side of the time.

As soon as that happens, you will see the screen light up. To put it into Multi Racer mode, either press number 3 on your remote pad or on the clock press the start button until the seconds decimal is no longer visible.

As soon as the clock shows zeros, you are ready to go.

To start the race, press 3 on your remote or the start button the side of the timer.

The timer can either be displayed in seconds or hundredths of seconds. That switch is located on the side of the time.

As racers start to cross the finish line. Press either 6 or the stop button on the side of the clock to record their finish time. When you record the finish time, the system will blink twice to show you that it is recorded. To end the race, you can either press number 2 on your remote pad or the end button on the side of the race clock.

If you are hooked into a PC, this is the time that your program will auto populate. To display the finish times on the clock manually press either one to move down on place order or number 4 on your remote to move up in place order.

The clock will first display the place order then it will display the finish time.

If you have any questions about set up or operation of Gopher’s MVP race time, please feel free to call us any time at 1-800-533-0446

Shop our online catalog: http://www.gophersport.com/
Join us on Facebook:   / gopher.pe  
Follow our PE Blog: http://www.gophersport.com/blog/