Victron VenusOS & Raspberry Pi| Install Relay Board and setup | 3 Relays | Part II

Описание к видео Victron VenusOS & Raspberry Pi| Install Relay Board and setup | 3 Relays | Part II

Cerbo GX does allow you to connect Relays and use automations to trigger them. Since the Raspberry Pi is limited to its USB interfaces I want to try a Relay Board to connect to the Raspberry Pi and see if it works with VenusOS and what we need to configure. This second Relay board allows to pass through the pins and still use them for different reasons like connecting a housing fan.


Copy & Paste Commands:

Relay 1 / GPIO 26
26 out relay_1

Relay 2 / GPIO 20
20 out relay_2

Relay 3 / GPIO 21
21 out relay_3



Instruction Source:
https://community.victronenergy.com/q...

Victron VRM Portal: https://vrm.victronenergy.com/
Victron Professional: https://professional.victronenergy.com/



Affiliate links:
Electronics-Salon RPi Power Relay Board
https://amzn.to/3qiRDWk

KEYESTUDIO 5V DCAC 4-Channel Relay
https://amzn.to/42bbtQg

Raspberry Pi 3 Model B+ Starter Kit
https://amzn.to/3Lb3Tig

Raspberry Pi 7 inch Capacitive Touch Screen
https://amzn.to/3O2VcJT

Victron Energy VE.Direct to USB Interface
https://amzn.to/2TbCEx4

Power Supply Raspberry DC-DC 12V to 5V 3A Micro USB Converter Voltage Step Down
https://amzn.to/2UE3Ftf

Raspberry Pi 3 B+ Case
https://amzn.to/3qt1Mf3

SanDisk Ultra 32GB microSDHC UHS-I Card with Adapter
https://amzn.to/3hArEBJ

WEIZE 12V 100Ah LiFePO4 Lithium Battery
https://amzn.to/3Llfuev
Renogy Deep Cycle AGM Battery 12 Volt 100Ah
https://amzn.to/3dgngWO

Victron Energy Smart Battery Sense
https://amzn.to/3wXIdOp

Victron Energy SmartShunt
https://amzn.to/35Ufo9C

Victron Energy SmartSolar MPPT
https://amzn.to/3vVpWzF

Victron Energy Smart Battery Protect
https://amzn.to/3gV6E9q

Victron Energy VE.Direct to USB Interface
https://amzn.to/3jnvEaS

8mm 5/16“ Copper Core Nickel-Plated Terminal
https://amzn.to/3h5wBSx

Cable Lug Crimping Tool
https://amzn.to/3jjCJcC







Timecodes
00:00 - Intro
00:56 - Replace Relay Board
02:09 - Unmount Old Relay Board
02:31 - Install New Relay Board
03:12 - VenusOS Software Configuration
04:47 - Script Adjustments
07:59 - Important Site Note
08:32 - Comments
08:45 - Outro

Комментарии

Информация по комментариям в разработке