Скачать или смотреть INSIDE the GUITAR AMP FACTORY – How MARSHALL STYLE AMPLIFIERS Are BUILT for ROCK TONE Full Process

How does a plain wooden box and metal chassis become a roaring Marshall-style guitar amp built for legendary rock tone? 🎸🔥 In this video, we go INSIDE the GUITAR AMP FACTORY to show how MARSHALL-STYLE AMPLIFIERS are built (full process) — from raw components and circuit design to cabinet building, wiring, speakers and final tone testing. This is the complete guitar amplifier manufacturing process. 🏭⚡

You’ll see each key stage of the rock amp production process:

Step 1 – Chassis, Cabinet & Hardware Fabrication
Metal sheets are cut, bent and drilled to create the amp chassis, while plywood or solid wood is cut, glued and reinforced into strong speaker cabinets. Handles, corners and mounting points are added for road-ready durability. 🪵🔩

Step 2 – Transformers, Power Supply & Circuit Boards
Engineers install power and output transformers, tube sockets or solid-state components and mount PCBs or turret boards. The power supply and preamp sections are laid out for classic Marshall-style gain structure and dynamics.

Step 3 – Hand Wiring, Soldering & Layout
Technicians carefully wire resistors, capacitors, tubes, jacks and pots, following the schematic and layout that shape the amp’s rock tone, sag, headroom and response. Clean solder joints and neat wiring help reduce noise and hum. 🧰

Step 4 – Controls, Front Panel & I/O
Volume, gain, EQ, presence and master controls are installed on the front panel. Input jacks, speaker outs, FX loops and power switches are wired in, turning the chassis into a fully controllable guitar head or combo.

Step 5 – Speaker Selection & Cabinet Assembly
High-power guitar speakers are mounted into the cabinet, wired for the correct impedance and secured for touring use. The amp chassis is bolted into the head shell or combo cab, creating the classic rock stack or combo. 🔊

Step 6 – Tolex, Grill Cloth & Classic Styling
Cabinets are wrapped in Tolex-style vinyl, fitted with gold piping, corner protectors and grill cloth to complete the Marshall-style rock look while protecting the wood and speakers. 🎨

Step 7 – Biasing, Tone Testing & Quality Control
Technicians bias tubes, check voltages and listen to each amp at different volumes. Clean and overdrive tones are tested with real guitars to verify punch, crunch and sustain. Only amps that pass strict sound and safety tests are packed and shipped. ✅

From raw wood, metal and components to stage-ready Marshall-style guitar amplifiers, this full-process factory tour shows how engineering, electronics and classic rock design come together inside the guitar amp factory.

If you love guitar gear, amp building, factory tours and “how it’s made” content, be sure to ⭐ LIKE this video, ✅ SUBSCRIBE to How Its Manufactured, and 🔔 TURN ON THE BELL so you don’t miss our next full manufacturing process deep dive.

👉 Question for you: For your dream rock rig, what matters most — tube type, speaker choice, wattage or EQ voicing? 💬 Tell us in the comments!

⚠️ Disclaimer: This video shows Marshall-style guitar amplifiers for educational and documentary purposes and is not affiliated with or representing any specific brand.

#GuitarAmp #MarshallStyle #RockTone #HowItsMade #Marshall #howitsmanufactured