Probe Technology Breakdown - Oscilloscope Front End Design (part 6)

Описание к видео Probe Technology Breakdown - Oscilloscope Front End Design (part 6)

Learn how probes are designed!
Learn about acquisition board layout and ADC infrastructure!
Click to subscribe! ► http://bit.ly/Scopes_Sub ◄

Part 1: What is an Oscilloscope?
   • What is an Oscilloscope - Front End D...  

Part 2: Hardware Layout - What's Behind the BNC?
   • Hardware Layout - Oscilloscope Front ...  

Part 3: Attenuators and Preamps
   • Attenuators and Preamps - Oscilloscop...  

Part 4: Signal Offsets and Filters
   • Filters, Impedances, and Comparators ...  

Part 5: ADCs and Acquisition Boards
   • Acquisition Boards and ADCs - Oscillo...  

-----

There are different characteristics of probes that must be considered.

1. The signal bandwidth - what signal frequencies do you need to be able to see with the oscilloscope?

2. Signal source impedance - what's the impedance of the source you are trying to probe? You want your probe to match the impedance of your source to get the best signal quality.

3. Signal size (dynamic range) - what's the maximum voltage of your signal? Some very fast probes will not be able to measure high voltages.

4. Single ended or differential probes - Knowing whether your signals are differential or single ended will help you decide which probe you need.

5. Probe output impedance - what is the interface impedance with the scope that you are using?

6. Cost and ruggedness.

There are three main types of probes.

1. High impedance passive probes
Pros: more rugged, least expensive
Cons: lower bandwidth and have higher capacitive loading

2. Low impedance resistor divider passive probes
Pros: higher bandwidth, lower capacitive loading than a passive probe
Cons: Low input resistance, scope must have a 50 ohm input.

3. Differential active probes
Pros: Highest bandwidth, lowest capacitive loading, higher input resistance
Cons: higest cost, requires power and control interface, smaller input voltage ranges, oscilloscope 50 ohm input required.

Differential active probes also have a number of optional probe tips and accessories to help engineers connect to their devices.

Learn more about using oscilloscopes:
http://oscilloscopelearningcenter.com

Check out the EEs Talk Tech podcast:
   • EEs Talk Tech - An Electrical Enginee...  

The 2-Minute Guru Season 2 playlist:
   • The Keysight 2-Minute Guru (Season 2)  

The 2-Minute Guru Season 1 playlist:
   • The Keysight 2-Minute Guru (Season 1)  

More about Keysight oscilloscopes:
http://bit.ly/SCOPES

Check out our blog:
http://bit.ly/ScopesBlog

Like our Facebook page:
  / keysightbench  

#Oscilloscope #OscilloscopeProbe #OscilloscopeProbes #Probes #OscilloscopeProbing #hardware #passiveprobe #activeprobe #electronics #electricalengineering #computerengineering

Комментарии

Информация по комментариям в разработке