Loader Bucket Cutting Edge Replacement

I replaced the cutting edge on my skidsteer bucket utilizing a replacement blade sold by Titan Attachments.
I could have just welded the new cutting edge onto the bottom of this one, but I ended up removing the worn edge. To minimize the amount of bucket material removed, I cut just behind the top weld attaching the old edge to the bucket. On the bottom side, I did my best to locate and cut through the welds attaching the edge to the bucket without cutting into the bucket itself. I also had to cut through the cutting edge where it joined the sides of the bucket. After several discs, and a lot of time, I was able to pound and separate the old edge from the bucket.
The new edge went on smoothly by squaring and clamping it to the bucket. The mating side pieces to the bucket were also worn, which required manufacturing some new corner joints.

Visit https://www.masterjacks.com/videos/lo... for Amazon part and tool links.

Amazon Affiliate Links
Replacement Cutting Edge https://amzn.to/3tpwIlQ
Makita 9" Grinder https://amzn.to/46FVa0E
9" Cutoff Disc https://amzn.to/3S0G69A

CHAPTERS
0:00 Cutting Edge Removal
2:05 Bucket Prep
2:18 Replacement Edge Install
4:02 Bucket Repairs
5:35 Paint