How to Replace Intake Manifold 1999-2007 Chevy Silverado

Buy Now!
New Intake Manifold from 1AAuto.com https://trq.video/ib-1AEIM00060

If your intake manifold has cracked or broken, it is critical to replace it to ensure proper running of your vehicle. This video shows you how to install a new V8 intake manifold on your 1999-2007 Chevy Silverado.

• Check here for more videos on the 1999-2007 Chevy Silverado:    • Chevy Silverado 1999-2006 1st Gen  

This repair was done on a 2004 Chevrolet Silverado 1500 LT 5.3L and the process should be similar on the following vehicles:
1999 Chevrolet Silverado 1500
2000 Chevrolet Silverado 1500
2001 Chevrolet Silverado 1500
2002 Chevrolet Silverado 1500
2003 Chevrolet Silverado 1500
2004 Chevrolet Silverado 1500
2005 Chevrolet Silverado 1500
2006 Chevrolet Silverado 1500

Tools you will need:
• Flat Blade Screwdriver https://trq.video/oF5-1AXAA00013
• 8mm Socket https://trq.video/oBa-1AXAA00017
• Trim Tool Set https://trq.video/omq-1AXXX00006
• Needle nose pliers https://trq.video/ofw-1AXAA00051
• Needle nose pliers https://trq.video/ofw-1AXAA00052
• Pliers
• Ratchet https://trq.video/oIX-1AXAA00016
• Gloves https://trq.video/oeE-1AXSS00048
• Safety Glasses
• Hammer

Subscribe:    / @trq  

Check out our playlist:
Chevy Silverado 1999-2006 1st Gen:    • Chevy Silverado 1999-2006 1st Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.