Replace Front Brake Pads & Rotors - Audi S4 & S5 B9 2018+

Replace front brakes and rotors. Apply to Audi S4 & S5 B9 2018+ models with 6-piston calipers. Probably works for 4M Q7/Q8, B9 Q5/SQ5/S4/S5/RS5, C8 A6/A7, and D5 A8 too.
Brake pads upgraded to EBC Yellow Stuff. Rotors upgraded to ECS Tuning 2-Piece Rotors.

0:00 Intro
0:49 Remove wheel and raise car
1:56 Remove caliper
5:34 Remove brake pads
6:50 Replace brake rotor
8:37 Install brake pads
12:56 Install caliper
15:42 Install wheel
16:18 Summary

Tips:
* 12/11/2022 A good tip: Turn your wheel to the maximum when changing calipers. It will be easier to reach.
* 11/17/2023 A tip from comments: "You don't need that fancy $70 M10 TZN Stubby set. Turn the steering wheel to gain access to the bracket and caliper bolts. This will give you a full foot in there. For example, when working on the right front brake, turn the wheel to the left to access those bolts without special tools."

Tools:
* Wheel cap removal tool.
* 17mm socket to remove wheel bolts.
* 12-point M10 bit socket to remove the bracket.
* 13/16 inch or 21mm socket to remove caliper.
* 6-point T30 bit socket to remove the rotor bolt.
* Caliper Piston Spreader Tool.
* Brake caliper grease.
* Rust remover.
* Wrench or breaker bar to loosen bolts.
* Torque wrench to tighten bolts.

Tool links:
* 6-point T30 bit socket: Schwaben Complete 26 Pc Stubby Socket Driver Set https://www.ecstuning.com/b-schwaben-...

Tightening specs:
* Wheel bolts: 120Nm
* Caliper bolts: 200Nm

Related videos:
Replace rear pads and rotors:    • Replace Rear Brake Pads & Rotors - Au...  
Find Audi Repair Manuals and Buy Brake Parts:    • Find Audi Repair Manuals and Buy Brak...