RC SCALE JAS39 GRIPEN 70 EDF JET PLANE TEST, 风范航模鹰狮战斗机70涵道像真机开箱飞行测评

It has a coquettish tiger-like painting, and the elegant new JAS39 makes my eyes shine. Whether it is the big beauty on the vertical tail or the auxiliary fuel tank that looks like a caterpillar bread, it is definitely the highlight of this aircraft.
My machine is a PNP configuration version, and the installation difficulty is relatively low. It takes about 2-3 hours to complete the installation and debugging. The vertical tail, auxiliary fuel tank rack, and tail nozzle need to be bonded with foam glue, and the main wings and canards are installed with screws. The mounting base of the canard is hexagonal, which makes it easy to align the screw holes and also effectively reduces the false position during movement.
The highlight of this aircraft is its painting. It uses the super cool paint during the Tiger Club. There are exquisite decals on the vertical tail and canard wings. The beauty with the tiger head and big eyes are very attractive. The tiger spots on the fuselage and auxiliary fuel tank are traditional stickers, and the auxiliary fuel tank is spray-painted with a yellow background. At first glance, it really looks like caterpillar bread.
In terms of flight performance, it feels like a 90-degree ducted heavy fighter. It is solid and high-speed, but it is relatively easy to fly among ducted fighters. The delta wing layout allows it to fly at a stable and high angle of attack. Its level flight requires a high speed. With a 70-degree duct and a 6S battery, it can maintain a high-speed flight and can even complete large-radius loops and short-term vertical climbs. The close-coupled canard requires linkage between the canard and the trailing edge rudder surface of the wing. If only the canard is operated, its pitch maneuverability is very poor.
Brand: fengfan Model
Aircraft model: JAS-39 Griffin
Power: 70mm ducted
Requires battery: 6S 3300-4200mAh 45C
Equipment used by Haozi:
‪@FrSkyRClive‬ X18 remote control
DaPu 6S 4200mAh 75C Lipo battery

它有着风骚的老虎会涂装，风范的新款JAS39让我眼前一亮，不论是垂尾上大大的美女，还是像毛毛虫面包一样的副油箱，绝对是这架飞机的亮点。
我的这架是一个PNP配置的版本，装机难度较低，大约2-3小时即可完成装机和调试。垂尾、副油箱挂架、尾喷口需要用泡沫胶粘接，主翼和鸭翼均由螺丝安装。鸭翼的安装座是六角形，方便对正螺丝孔，也很好的降低了动作时的虚位。
这架飞机的涂装是它的亮点，使用的是老虎会期间的超炫酷涂装，垂尾、鸭翼上为精美的水贴，虎头美女和大大的眼睛非常有神。机身和副油箱的虎斑为传统贴纸，副油箱是黄色底色的喷漆，乍一看真的很像毛毛虫面包。
飞行性能上，它的手感有种90涵道重型战斗机的感觉，扎实、高速，不过算是涵道战斗机里相对好飞的，三角翼的布局让它可以飞出稳定的大迎角状态。它的平飞需要较高的速度，搭配70涵道和6S电池，可以让它保持高速飞行，甚至大半径筋斗和短时间垂直爬升也可以完成。近距耦合式鸭翼需要设置鸭翼和机翼后缘舵面的联动，如果只动作鸭翼，它的俯仰机动性非常差。
品牌：风范模型
机型：JAS-39狮鹰
动力：70mm涵道
需要电池：6S 3300-4200mAh 45C
昊子使用的设备：
睿思凯X18遥控器
达普6S 4200mAh 75C锂电池