How to Install - Korky QuietFILL Platinum Fill Valve & 2” Flapper Kit

How to Install - Korky QuietFILL Platinum Fill Valve & 2” Flapper Kit

https://www.korky.com/parts/fill-valv...

Hello and Welcome to Korky Toilet Repair. Today we are going to install your new Korky QuietFILL Platinum Fill Valve & Ultra Saver Flapper. The first step is to shut off the water supply to your toilet. Next flush your toilet. Mark the water level in the tank with a pencil. Drain the excess water. Sponge out the remaining water in your toilet tank. Remove the old flapper. Install the Korky Ultra Saver Flapper. Attach the flapper ears to the tabs of the flush valve. Attach the flapper chain to the flush lever with minimal slack. Turn the water supply on and wait for the tank to fill completely. Turn the water supply off and flush. If the water drops within a half inch of the pencil mark your installation is finished. If not, rotate the red band to the open position and reinstall the flapper. Turn the water supply on and let the tank refill completely. Turn the water supply off and flush. If your water level is still not within a half inch of the pencil mark, adjust the dial so the next lowest number aligns with the arrow. Then reinstall your flapper. Turn the water supply on and let the tank refill completely. Turn your water supply off and flush. Repeat this process until the water level drops within a half inch of the pencil mark. The first step is to shut off the water supply to your toilet. Next flush your toilet. Mark the water level in the tank with a pencil. Drain the excess water. Sponge out the remaining water in your toilet tank. Place a bucket underneath your toilet tank to catch any excess water. Disconnect your water supply line and remove the mounting nut. Remove the old fill valve. Now, turn the top of your new fill valve counter clockwise and pull up to fully extend. Place the valve in the tank and press down on the fill valve until the corner of the silver cover lines up with the top of the flush valve. Lock the fill valve in place by twisting the upper half clockwise. Make sure the rib on the top of the valve lines up with the pegs on the bottom half. Attach the refill tube to your new fill valve. Make sure the refill tube has a direct path to the flush valve. When your fill valve is set, screw on the mounting nut until hand tight. Push the refill tube towards the front of the tank to ensure the port is locked in place. Insert the metal clip into the refill tube and attach the clip to the flush valve. Turn the refill adjustor clockwise to the fully open position. Reattach the water supply line. Turn the water supply on and let the tank fill completely. Flush. Wait 2 minutes for the water in the bowl to settle, the excess water will drain out. Mark the water level in the bowl with a pencil or dry erase marker. Flush. If the bowl water level reaches the mark before the tank is finished filing, turn the dial counter-clockwise to reduce flow. If the bowl water level is below the mark once the tank is done filling, turn the dial clockwise to increase flow. Repeat this step until the water level reaches the pencil mark at the same time the tank finishes filling. Congratulations, you have successfully installed your new Korky QuietFILL Platinum Fill Valve & Ultra Saver Flapper. Thank you for choosing Korky. If you have any questions or need further assistance with your installation, please visit our website or call us at 1-800-528-3553.