Скачать или смотреть Rusted of antique irons Restoration DIY 1

I found the iron thrown in the scrap metal. It was another challenge for me to renovate.
I brought her home and started the renovation the next day. The iron was very rusty and destroyed.

Something from history :

The iron is a device for ironing, or smoothing the fabric using high temperature and pressure. Ironing works by releasing the bonds in the fibers of the fiber-forming polymers due to temperature. When the fibers are hot, they straighten under the pressure of the iron and retain their shape after cooling. Some substances such as cotton also need water.

Initially, the linen was pressed or rolled, a hot iron appeared in the 15th century. In the past, the iron looked like a glazed metal block with a handle. After heating, for example, on a kitchen stove plate, the thermal inertia of the metal block allowed for a few minutes to maintain sufficient temperature to iron. After getting cold, it was necessary to put the iron on the plate and to warm it up again. The shape of the iron resembles a foot with a triangular pointed tip on one side and a flat edge on the "heel" side. This shape has also been adopted in other, more modern designs due to its comfortable ironing.

The refinement of the iron was a construction where a small charcoal fireplace was placed on the "foot", where several hot coals could be inserted to maintain the iron's high temperature without having to shut it down on the hot plate at any time. Another alternative was the irons where the alcohol was melting.

In the twentieth century, irons where an electrically heated spiral with a power of several hundred watts were inside and which had been fed from the power distribution grid had spread. The first electric irons were discovered in the 1890s. Later, a thermoregulator was added to the iron to maintain the desired temperature to a few degrees Celsius, and a humidifier (steam iron) appeared in the iron. (Wikipedia feed)



If you have some information about restoration photos, you can share them with others on my Facebook site:

  / 951735661652138  

If you have any questions about the process, use machines or other stuff, ask me in the comments. I'm trying to answer everyone and as soon as possible.

I'm sorry about my bad English, it's not my language.

I'm uploading videos about restoring mechanical things. I'm uploading videos about restoring old wooden things.

If you like this recovery, share and subscribe :)

Thanks for your advice on how to improve this channel!

youtube channel    / veradona1  


action index:

00:00 presentation of broken iron
00:12 Dismantling, screws were not loosened, it was necessary to grind
00:27 insertion into the fire to loosen the screws
01:00 one has been released, the other one has to be drilled
01: 20 cutting new threads
01:36 cleaning the iron body with sandpaper
01:52 brushing
02:02 preparation before welding armrests
02:55 releasing the stress of the weld by fire
03:00 grinding weld armrests
03:19 rear door production
04:45 application of rust remover
04:55 clearcoat varnish
05:03 compilation
056: 19 done