How to Replace Outer Tie Rod 2005-14 Ford Mustang

Buy Now!
New Tie Rod Set from 1AAuto.com https://trq.video/ia-1ASFK01600
New Tie Rod from 1AAuto.com https://trq.video/ia-1ASTE00428

Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections. This video shows you how to install new TRQ outer tie rods on your

• Buy TRQ at 1AAuto.com: https://www.1aauto.com/yt/i/1ASTE00428
• Check here for more videos on the 2005-14 Ford Mustang:    • Ford Mustang 2006-14 5th Gen  

This repair was done on a 2006 Ford Mustang Base 4.0L and the process should be similar on the following vehicles:
2005 Ford Mustang
2006 Ford Mustang
2007 Ford Mustang
2008 Ford Mustang
2009 Ford Mustang
2010 Ford Mustang
2011 Ford Mustang
2012 Ford Mustang
2013 Ford Mustang
2014 Ford Mustang

Tools you will need:
• 18mm Socket
• 21mm Socket
• Adjustable Wrench
• Locking Pliers https://trq.video/ob2-1AXAA00139
• Side Cutters
• 1/2 Inch Impact Gun https://trq.video/ocP-1AXAA00252
• Torque Wrench https://trq.video/ots-1AXAA00044
• Hammer

Subscribe:    / @trq  

Check out our playlist:
Ford Mustang 2006-14 5th Gen:    • Ford Mustang 2006-14 5th Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.