How to Replace Throttle Body Assembly 2007-2011 Toyota Camry (2.4L L4)

Buy Now!
New Throttle Body Assembly from 1AAuto.com http://1aau.to/ia/HTTBA00027

This video shows you how to install a new, engineered to fit TRQ throttle body on your 2007-2011 Toyota Camry (2.4L L4). Rough idle, poor performance, and a check engine light are all signs of throttle body problems. If a thorough cleaning didn’t resolve the issues, you may need to replace the assembly.

Once installed, you will need to follow the relearn procedure.

1.After 3 minutes, turn the engine off and leave it off for 60- seconds.
2.Start the engine again and let it idle in park for 3 minutes one more time.

This process should be similar on the following vehicles:
2007 Toyota Camry
2008 Toyota Camry
2009 Toyota Camry
2010 Toyota Camry
2011 Toyota Camry

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obwX/1AXAA00013
• 10mm Socket http://1aau.to/obsp/1AXAA00017
• 12mm Socket http://1aau.to/obNP/1AXAA00015
• Pliers
• Ratchet http://1aau.to/obSn/1AXAA00016
• Cloth Rags http://1aau.to/oIa/1AXSS00035
• Gloves http://1aau.to/oaCj/1AXSS00048
• Hose Clamp
• Safety Glasses

Subscribe:    / @trq  

Check out our playlist:
Toyota Camry 2007-2011 6th Generation:    • Toyota Camry 2007-2011 6th Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.