How to Program an Interlogix Networx NX4, NX6, or NX8 Tutorial - Alarm System Store

Jason of Alarm System Store takes you through a tutorial on programming the Interlogix NetworX NX4, NX6, or NX8 alarm panels. He steps you into programming by using the NX 1308E keypad.

He works with you on how to go about setting up zones, user codes, and other basic programming setup items.

The Interlogix NetworX panels are a line of alarm control panels that will give you the ability to wire in hardwired devices or use Interlogix wireless detection devices by adding the NX548E 48 zone wireless receiver.

The NetworX NX4 can handle up to 8 zones with 4 onboard and up to 8 user codes. The NetworX NX6 can handle up to 16 zones with 6 onboard and the rest can be had with zone expanders or wireless receivers. And finally, the NetworX NX8 can handle up to 48 zones with 8 onboard and more to be had by adding zone expanders or a wireless receiver.

You can check out all of the kits that we offer in the Interlogix NetworX series by visiting this link - https://www.alarmsystemstore.com/coll...

Please comment in the comments section if you have any questions and be sure to slap that like button and subscribe to our channel for all of our how to videos for some of today's most popular DIY security systems.

You can also visit our website at http://alarmsystemstore.com for all of our great deals on security equipment.

You can also follow us on the following social sites for information, coupon codes, and much more!

Facebook -   / alarmsystemstore  
Twitter -   / alarmstore  
Google+ - http://plus.google.com/u/0/b/11635252...