Скачать или смотреть Wittclip™ Installation

Among the many innovations of Witt Lining Systems is the Wittclip.

Wittclips make for a faster installation and for a better fitting drop in tank liner.

Wittclips are made from stainless steel and comprise of the legs, the stud, a nut and a washer. Different styles of Wittclips are available to accommodate different tank flange dimensions.
The Wittclip is designed to be fastened to the back side of the liner. Pass the stud through the pre-punched holes on the liner and attach the nut and washer. Finger tight is sufficient.

Begin by attaching the clips to the tank in the corners of the tank and work your way towards the middle. Pulling up on the sidewalls of the liner will provide a little extra slack to get the clip on to the tank flange.

With the liner and clips properly installed, the creases of the liner will align with the creases of the tank. The weight of the solution will push the liner flush with the sidewalls of the tank while the Wittclips keep the liner from sliding into the tank.

For more information visit our website at http://wittliners.com/