Скачать или смотреть New Raspberry Pi 7" Touch Screen LCD - Assembly

Loads of folks seem to be having an issue with getting the official Raspberry PI 7" LCD up and running so I got one and have put together this detailed video (Well 2 videos really) showing how its done

EDIT
***********************************************************************************************************************
I accidently had the ground cable from the LCD on pin 8 and not 6 on the PI Header. Please make sure you use PIN 6 for the ground.
***********************************************************************************************************************

First video deals with the assembly only with closeup pictures to help you understand where the cables go and how they fit into the connectors
The second is a short test of the display using Raspbian 1.5.0 and we add a Virtual Keyboard.


Some people have tried to put them in wrong, previous instructions I have seen do not always make it clear so mistakes are made. I am hoping that my video will help to clarify everything

You can get these displays from numerious places including at the following links

RS-Online http://uk.rs-online.com/web/p/graphic...|acc

Newark/Farnell :- http://canada.newark.com/raspberry-pi...

Raspberry PI SWAG store :- http://swag.raspberrypi.org/products/...

PI HUT :- http://thepihut.com/collections/raspb...

and many others


NOTE: there was a mistake in my wiring to the PI, I accidently connected the ground (Black) wire to pin 8 of the PI instead of PIN 6. It should go to PIN 6.
This did no harm in this case as I had not enabled the serial functionality but it should be noted that if I had, It would have resulted in a short on a PI output pin. this may have caused damage. I should have said the third pin down not 3 pins down from the first. Sorry for an y confusion