Скачать или смотреть Setting up the Electroencephalography (EEG) Cap for BITalino

In this video, we show how to setup the EEG sensor, electrode holders and cap that can be used with BITalino.

Per BITalino main board (aka BITalino Core) it is possible to acquire up to 6 channels, 4 with 10-bit resolution (A1-A4) and 2 with 6-bit resolution (A5 & A6).

Up to three BITalino Cores can be used, for a total of 18 channels. Per BITalino Core the set of parts is:

1x Adjustable Silicon Cap for EEG (https://store.plux.info/accessories/2...
1x BITalino Core BT (https://store.plux.info/bitalino-comp...
1x 500 mAh 3.7V Battery (https://store.plux.info/batteries/203...
2x Packs (total of 20 electrodes) Non-gelled Reusable Ag/AgCl (https://store.plux.info/electrodes/60...
6x 3D Printed EEG Electrode Holder (https://store.plux.info/accessories/2...
5x 2-Lead Electrode Cable (https://store.plux.info/cables/227-2-...
1x 3-Lead Electrode Cable, functioning as the sixth EEG point and reference electrode (https://store.plux.info/cables/226-3-...
6x Electroencephalography (EEG) Sensor (https://store.plux.info/bitalino-sens...
6x Sensor Cable (https://store.plux.info/cables/225-se...
1x Nuprep Skin Preparation Gel (https://store.plux.info/electrodes/71...
1x Ten20 Conductive Paste (https://store.plux.info/electrodes/70....

Optional Items (for protecting your sensors and BITalino Core):
1x 3D Printed Casing for (r)evolution Plugged (https://store.plux.info/enclosures/58...
6x 3D Printed Housing for Sensors & Actuators (https://store.plux.info/enclosures/25....