Racer X Garage: Ride Engineering Split Triple Clamps

Ride Engineering KTM clamps have been designed with four goals in mind:
1) Optimize body position: Bar position 3mm back from stock. Ride Engineering also offers optional offset bases for their bar mounts providing 4 bar positions as measured from the stem hole: 6mm forward, 9mm forward, 15mm forward & 18mm forward (using stock bar mounts your positions are either 7mm or 17mm forward);
2) Flex: This new split design is made from 2024 aluminum and provides far better comfort and uncompromised suspension action;
3) Improve the handling with a new gull wing design;
4) Place the pinch bolts in the front to allow for different aftermarket handguard mounts and added flex. Each set comes with frame mounted hour meter relocation bracket.

https://ride-engineering.com/products...


ABOUT PUREKANA
PureKana is your best source for quality, affordable wellness products made from hemp-derived CBD. Based in Scottsdale, Arizona, we at PureKana are dedicated to providing you with the highest quality, most affordable hemp CBD products on the market.
https://purekana.com/

Visit Racer X Online: https://bit.ly/2VKTEp0
Subscribe to Racer X Magazine: https://bit.ly/2E45hlW
Follow us on Instagram: https://bit.ly/2X2F7Xc
Follow us on Facebook: https://bit.ly/2HvF6Wy
Follow us on Twitter: https://bit.ly/2JWWaWV
Subscribe to Racer X on YouTube: https://bit.ly/2HvhS2E