STM/20-169 18' Toy Hauler

Subscribe now
• https://www.youtube.com/c/StyroMAXIns...

STM/20-169 was Davina and Manni's 18 foot toy hauler!
This was a big toy hauler with even bigger side and rear access doors.
These doors were reinforced with StyroBEAM/LT, a 45x25mm Fibreglass pultrusion beam, which added back strength that the doors took out.

We used StyroSEAL/HD for the large doors and StyroSEAL/LT for the smaller front access door.

The door hardware was StyroT-HANDLE/HD to match the StyroSEAL/HD and StyroLOCK/MED to match the StyroSEAL/LT.

The body was trimmed with StyroTRIM/RV in Anoside/White combination.

Lights were from LED Autolamps.

We added in some strip gussets to add additional structural support, given the large open space inside but it can also be used to run air/electrical etc.

For more information, check us out
• https://www.styromax.com.au
•   / styromaxcompositepanels  

StyroMAX is a leading manufacturer of composite fibreglass panel in Australia.
We are based out of Darra in South East Queensland.

StyroMAX produces a number of high-quality components direct to many established manufacturers Australia wide. Due to our high build standards and durable product we can offer a solution that fits with your warranty conditions and quality assurance standards.
Some of the services and products we offer manufacturers are:

• Faster construction time. (No complex timber or steel frames required)
• Reduced body weight. (Due to lightweight composite panelling)
• Impact resistant panelling. (Due to the use of FRP sheeting)
• High gloss FRP sheeting to both faces of panelling.
• Corner trims and service door trims.
• Internal panel conduits. (For cable routing)
• Repetitive manufacturing.
• Fast production turn-around. (Trade priority)
• CAD production drawings. (Via 3D solid modelling)
• CNC cut panels. (2 x 14.5mtr x 3.5mtr and 1 x 9mtr x 3.5mtr CNC profile cutting centres)
• Full back-up and support. (Accident repair gel coat always available)

StyroMAX offers a number of solutions for the Do It Yourself enthusiast.
Here’s some of the reasons why StyroMAX panels and products are great
for a DIY solution:

• Full flat pack panel set for your rolling chassis.
• Easy construction. (No complex timber or steel frames required)
• Reduced body weight. (Due to lightweight composite panelling)
• Impact resistant panelling. (Due to the use of FRP sheeting)
• High gloss FRP sheeting to both faces of panelling.
• Corner trims and service door trims available.
• Internal panel conduits. (For cable routing)
• Entry doors, service doors and windows available.
• 3D solid modelling of your sketches. (See your plans come to life before you construct)
• CNC cut panels. (2 x 14.5mtr x 3.5mtr and 1 x 9mtr x 3.5mtr CNC profile cutting centres)
• Teroson MS939 by Henkel. (Construction adhesive for your build)
• Full back-up and support. (Accident repair gel coat always available)

Subscribe now
• https://www.youtube.com/c/StyroMAXIns...

For more information, check us out
• www.styromax.com.au
•   / styromaxcompositepanels  

Thanks www.Bensound.com for the sweet beats.