How to Replace Belt Component Kit 2008-2016 Chevrolet Cruze

Buy Now!
New Drive Belt Component Kit from 1AAuto.com http://1aau.to/ia/GAEEK00259

This video shows you how to install a new tensioner pulley and serpentine belt on your 2008-2016 Chevrolet Cruze.
That squealing noise coming from your vehicle’s engine compartment could be a slipping belt, or it could be a bad pulley bearing, or both. A bad pulley could eventually damage the belt, which could create even further damage.

This process should be similar on the following vehicles:
2011 Chevrolet Cruze
2012 Chevrolet Cruze
2013 Chevrolet Cruze
2014 Chevrolet Cruze
2015 Chevrolet Cruze

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/ob/1AXAA00013
• Phillips Head Screwdriver http://1aau.to/ob/1AXAA00013
• Pocket Screwdriver
• 15mm Socket http://1aau.to/ob/1AXAA00015
• 19mm Socket http://1aau.to/oa/1AXAA00043
• 7mm Socket http://1aau.to/ob/1AXAA00017
• Trim Tool Set http://1aau.to/oc/1AXXX00004
• E14 Socket
• T20 Socket
• Ratchet http://1aau.to/ob/1AXAA00016
• Socket Extensions http://1aau.to/ob/1AXAA00015
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Block of Wood
• Floor Jack http://1aau.to/oa/1AXAA00068

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.