Wolfpack - How to Use the Attack Disc

This video shows the use of the attack disc in an actual attack. It explains the basic procedure for changing relative bearings to true bearings and how to determine the convoys course from the angle on the bow. During the actual attack you can see how to set up the TDC and finally the results of the attack (explosions!). Mistakes were made.

Convert relative bearing to true using attack disc:
1 Set own course below 180 at top of disc
2 Rotate bearing arm to relative bearing on the outside of the disc
3 Read true bearing on INSIDE ring of true bearing ring

Find convoy course:
1 Set own course below 180 at top of the disc
2 Rotate bearing arm to relative bearing on the outside of the disc
3 Rotate AOB ring (red/green) to match convoys AOB to the relative bearing.
4 Read convoy's course on the outside of the true bearing ring under the white triangle.

Steam Wolfpack page: https://store.steampowered.com/app/49...
Official Wolfpack Discord Server:   / discord  

See you in-game!

Timeline:
0:00 Start
0:30 Position AA gun
1:00 Convoy sighted
1:48 How to use attack disc #1
4:56 How to use attack disc #2
6:50 How to use attack disc #3
8:23 Set up TDC for correct AOB
9:10 Measure speed
9:59 Enter targeting data into TDC
11:49 Launch torpedoes
12:36 Second torpedo shot
13:19 Rear tube
13:53 Impact
14:58 Attack on second ship
15:40 Torpedo launch
16:05 Impact
16:25 Chasing shots
17:30 Escape
17:37 Subscribe