Скачать или смотреть etrailer | Feature Review Snap-Loc E-Track Tie-Down Anchors with 2" x 16' Ratchet Strap

Click for more info and reviews of this Snap-Loc Ratchet Straps:
https://www.etrailer.com/Ratchet-Stra...
Check out some similar Ratchet Straps options:
https://www.etrailer.com/dept-pg-Ratc...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-Snap...
Today, we're taking a look at the Snap-Loc E-Track tie-down anchors with ratchet strap. And this kit lets you anchor the included strap wherever you need a tie-down point. So this securely anchors your E-Strap where you need it, whether it's on a cart on a dolly, in your pickup or on your pickup and your truck trailer, racks, walls, ceilings, floors, and so on. Very versatile system. It includes two black E-Track tie down anchors, one E-Strap with ratchet and it comes with your hardware kit. So it comes with four hours screws, four washers and four lock nuts.

Now the anchors are made from thick 10 gauge steel with durable rust-resistant black powder coat finishing really nice design, very strong and durable and measure five and three quarter inches long by one inch wide by half inch deep. The bolt holes measure five 16 by five sixteenths and they're on five inch centers.Maximum load for these or break strength is 3000 pounds safe. Working load limit is 1000 pounds. Now the E-Strap is made of rigid polyester webbing with a built-in steel ratchet. It has protective coating, so you don't have to worry about rust or corrosion.

We have the E-Track fittings on the ends, so that way it can easily engage into the anchor slot, just like that. Also these anchors will accept any E-Track accessory. Now this strap measures two inches wide by 16 feet long. On this end, we have an 18 inch lead end, and we have the sewn on hook and loop fastener for easy storage. This is just a fastener that goes around the strap.

Keep it nice and bundled up. Also, you can use this to secure any excess strap that you have before you head down the road. So, that's really nice as well.That's sewn in, so you don't have to worry about misplacing that or losing it. The maximum load or break strength for the strap is 4,400 pounds. Safe working load limit is 1,467 pounds.

Really nice design. The ratcheting mechanism has three positions. So you have your fully closed or travel position. Nice large release lever. Middle position is your ratchet in position. And then your fully open position, is how you disengage or loosen the strap. So with it fully open, you can pull on that anchor end it'll release tension, allows you to loosen the strap and completely remove it from the ratcheting mechanism, if you want to. Product's also made in the USA. That's going to do it for today's look at the Snap-Loc E-Track tie-down anchors with ratchet strap.