RockShox Reverb Stealth: A1 & A2 Model Seatpost Service

This video will guide you through the full service procedure of Reverb Stealth A1 and A2 seatposts. If your seatpost has a RockShox logo at the top of the post beneath the saddle clamp, you have a B1 model. Go to sram.com/service to find information on B1 service.

00:35 Seatpost Removal
02:15 Hydraulic Hose Disconnection
02:40 Seatpost Disassembly
06:30 Top Cap Service
07:47 Seal Replacement
09:56 Seatpost Reassembly
15:48 Hydraulic Hose Connection

For this procedure you will need the following tools and supplies:

A long wooden or plastic dowel
SRAM Butter
A bench vise
RockShox vise blocks
Aluminum soft jaws
Grooved aluminum soft jaws
A Reverb IFP height stool
A RockShox bleed kit
Fluid level gauge
Fluid pan
7-9 20cm long canle ties
Suspension pump
T10 TORX wrench
1.5, 3 and 4 mm hex wrenches
6, 7, 9, 10 and 11 mm open end wrenches
10, 11, 23, and 34 mm crowfoot sockets
23 mm box end wrench
34 mm open end wrench
9 mm socket and socket wrench
Tourque wrench
Needle nose pliers
Internal snap ring pliers
Metric tape measure
A dental pick
A downhill tire lever
Isopropyl Alcohol and a lint-free rag
Nitrile gloves and safety glasses
A Reverb Stealth full service seal kit

Reverb Stealth service kits can be found in the RockShox Spare Parts Catalog, available at www.sram.com/service.

If you have questions about the installation or service of these or any SRAM components, please consult your local qualified bicycle mechanic.