XP DEUS depth test and deepest settings

In this video I will show you the difference between the deepest XP DEUS program, which is the RELIC program and the other programs. The tested object is a 20 mm silver medallion buried at 25 cm (10 inches). You will see that in this depth we have a detection only with the RELIC program. The difference between the RELIC program and the others is that the REACTIVITY is set to ZERO and this is the most important EXPERT settings which affects the detection depth. As well, we have the TX POWER = 3 in the RELIC program, but trust me, you do not need TX POWER greater then 2. It is tested and TX POWER = 3 is not deeper then TX POWER = 2, but it is more unstable. So, TX POWER = 3 makes the things worst. As well, if you set the AUDIO RESPONSE to 6 or 7 you will hear the deep signals better. And at the end, do not forget about the ground balance! Set the ground balance a little bit (3-5) lower then the PUMPING mode shows and you will hit one even two inches deeper! And believe me, set it properly and the XP DEUS is deep as the E-Trac in manual sensitivity mode and the PRO coil. Very deep metal detector for this small size coil.