PowerMill START to PART I: 2D Automation with Drilling Methods

Here is the recording of the live webinar that was broadcast on Tuesday, April 14th. Mike Belanger demonstrates the programming of a generic plate from “Start” to “Part”. Some key takeaways:
- Learning how to recognize 2D features and automate hole drilling
- Finishing your 2D and plate work faster with easy to learn automation

Part II will follow in a couple weeks. This next segment will compliment this demonstration by tackling the pocket and slot features, while comparing 2.5D curve VS feature machining

#autodeskmfg #autodeskpartner #cadcam #cam #cncmachining #cncmilling #powermill #skilledtrades #wemake

► Connect with SolidCAD:
Visit our website : https://www.solidcad.ca/
Follow us on Facebook:   / solidcad  
Follow us on Instagram:   / solidcadsolutions  
Follow us on Twitter:   / solidcad  
Follow us on Linkedin:   / solidcad  
Subscribe to our blog to get the latest industry updates: https://blog.solidcad.ca/