💎 How To Connect 𝐆𝐨𝐭𝐯 𝐃𝐞𝐜𝐨𝐝𝐞𝐫 To 2 TV's With AV Cable | Pbteck

How To Connect Gotv Decoder To 2 TV's With AV Cable





Connecting a GOtv decoder to two TVs using AV cables requires some additional equipment. Here’s a step-by-step guide to help you achieve this setup:

Components Needed:
1. GOtv decoder
2. Two TVs
3. RCA AV Splitter (1 Male to 2 Female)
4. Additional AV (RCA) cables (one set for each TV)
5. Power outlets for all devices

Steps to Connect:

1. *Connect the GOtv Decoder to the RCA AV Splitter:*
Locate the AV output ports on the back of the GOtv decoder. These will typically be color-coded yellow (video), white (left audio), and red (right audio).
Plug one end of the AV cable into these corresponding ports on the GOtv decoder.
Connect the other end of this AV cable to the input port of the RCA AV Splitter.

2. *Connect the Splitter to the Two TVs:*
The RCA AV Splitter will have two sets of output ports. Each set will have yellow, white, and red ports.
Take another set of AV cables and connect them to one of the output sets on the splitter. Connect the yellow, white, and red plugs to the corresponding ports.
Plug the other end of these AV cables into the AV input ports on the first TV.
Repeat this process with another set of AV cables for the second TV. Connect them to the remaining output ports on the splitter and then to the AV input ports on the second TV.

3. *Power On and Configure:*
Turn on the GOtv decoder and both TVs.
Ensure that both TVs are set to the correct AV input channel (AV1, AV2, etc.) where the cables are connected.
You should now see the same GOtv content on both TVs.

Additional Tips:
*Signal Quality:* Using an AV splitter can reduce signal quality slightly. If you notice significant degradation, consider using an active (powered) splitter instead of a passive one.
*Audio Management:* Since both TVs will display the same content, ensure the volume settings on each TV are managed properly to avoid audio conflicts.
*Cable Length:* Ensure that the AV cables are long enough to reach both TVs from the splitter. You may need to purchase longer cables if the TVs are far apart.

By following these steps, you can successfully connect your GOtv decoder to two TVs, allowing you to watch the same channel on both screens.




__________________________________
LINKS


WEBSITE:

https://www.pbteck.com






INSTAGRAM;


  / pbtecknology  


FACEBOOK;


  / pbtecknology  


TWITTER


  / pbtecknology  







TELEGRAM:


https://t.me/pbtecknology








#pbteckinfo #lnb #gotvinstallation #multitv #dishtv #directtv #dstv #satellitetv #dish #satellitedish #satellitereceiver #pbteck #pbtecknology #canalsat #canal+ #freefire