Скачать или смотреть Mac Pro 5,1 + RTX 5060 Ti – Gaming on Omarchy in 2026

Can a 15-year-old dual Xeon workstation game on Linux in 2026? Turns out — yes. More than you'd expect.

you can buy me a coffee to help with channel

https://buymeacoffee.com/gnugent

subscribe for updates

Subscribe for more reviews and videos    / @28allday  

or become a member

   / @28allday  



This video drops an Nvidia 5060 Ti into a Mac Pro 5,1 running Omarchy and tests what actually happens when modern GPU power meets ancient CPU architecture.
⸻
🔹 The Setup
The Mac Pro 5,1 — dual Xeon processors, BIOS flashed to support the 5060 Ti. Omarchy installed and running clean. No special tweaks. Just plug in the card, flash the BIOS, and go.
It's not optimised the way my main rig is. No NVMe in this run, no thunderbolt card, none of the extras I used to have in this machine. Just a straightforward test to see what works.
⸻
🔹 The Games Tested
Homeworld 3 — Epic settings. This one struggled. Around 34 FPS where a modern Ryzen 9 system would hit 70–80. The Xeons are the bottleneck here, not the GPU. It runs, but it's clearly hitting CPU limits.
Cyberpunk 2077 — Ultra settings with DLSS enabled, no frame gen. This was the surprise. Completely playable, smooth frame graph, and pulling decent numbers. Worth noting that Cyberpunk originally blocked machines without AVX support, but a patch fixed that — so the 5,1 can run it now.
Arc Raider — High settings with DLSS and frame gen both enabled. This genuinely shocked me. Frame rates were bouncing around but totally playable. On my main Ryzen 9 rig with the same 5060 Ti, this clocks 80–90 FPS. The 5,1 holds its own surprisingly well.
⸻
🔹 The AVX Problem
Some games flat-out refuse to run without AVX instruction sets. Helldivers II throws up an error immediately. That's a hard wall — no workaround, no patch. If a game requires AVX, the 5,1 cannot run it.
But plenty of titles either don't need it or have been patched to work without it. Cyberpunk is the best example of that.
⸻
🔹 Frame Gen on Linux — Does It Actually Work?
This is something I need to investigate properly in a separate video. During the Tomb Raider test with DLSS and frame gen both active, the numbers suggest frame gen is doing something. The frame rate behaviour looks consistent with it working — but I can't confirm that definitively yet.
If it is genuinely working through GameScope on Linux, that's a big deal. More testing needed.
⸻
🔹 Minor Issues
The inbuilt WiFi card refused to connect during initial setup. This was on a Sunday afternoon and I couldn't get to a wired connection immediately. Once on ethernet, everything worked fine. Likely a driver quirk rather than an Omarchy issue.
⸻
🔹 The Bigger Point
This isn't really about benchmarks. It's about what Linux can do with old hardware.
Omarchy runs perfectly on a 16-year-old Mac Pro. The desktop is responsive, the system is stable, and with a modern GPU it can genuinely game. It won't match a current-gen build — but it works far better than it has any right to.
Omarchy already supports T2 Macs out of the box. I've done a video putting it on a T2 Mac Mini. This is the same philosophy pushed further — Linux breathing real life into hardware that would otherwise be e-waste.
⸻
🔹 What Could Improve It
If I set this 5,1 up properly — NVMe drive, thunderbolt card, the full works like I used to have — it would be snappier. This was a bare-bones test. There's headroom left.
⸻
🔹 Important Notes
⚠️ BIOS flash required for 5060 Ti support — walkthrough at the start of the video
⚠️ AVX-dependent games will not run on this hardware
⚠️ Frame gen testing is inconclusive — dedicated video coming
⚠️ This is a fun experiment, not a recommendation to build a gaming rig from a Mac Pro
⸻
Just a bit of fun seeing what's possible. Thanks for watching.
00:00 - Start
00:17 - Preamble
01:14 - MAC PRO5,1
10:12 - BENCHMARKS AND GAMES
14:06 - Final Words